Mechanical Engineers in New Jersey. BLS OES + DOL OFLC + reader-reported submissions. How this is built →
What the numbers say
Mechanical Engineers in New Jersey earned a median of $107,020 in 2024, about 2.3% above the national median of $104,651. The gap is modest. New Jersey is not a standout on the headline number the way some coastal states are for other engineering disciplines.
The bigger story is at the ends of the range. The bottom 10% of Mechanical Engineers here earned $72,440. The top 10% earned $159,010. That is a difference of roughly $86,500 between an early-career role and a senior one. Experience, specialization, and the sector you land in drive most of that spread.
New Jersey's cost-of-living index sits at 113.4, meaning prices run about 13% above the national baseline. Adjust for that and the nominal premium over the national median largely disappears. A Mechanical Engineer earning the state median here has roughly the same purchasing power as a peer at the national median elsewhere in the country.
BLS projects employment for Mechanical Engineers to grow 9% between 2024 and 2034, a rate it categorizes as faster than average. New Jersey's mix of pharmaceutical manufacturing, defense contractors, and chemical processing firms keeps steady demand for the occupation, though the state's overall employment base for the role is relatively concentrated at around 4,440 positions.
Salary distribution
Where New Jersey mechanical engineers fall on the wage curve.
Shaded band = interquartile range (where most full-time workers fall)
The middle 50% of workers earn between $92,750 and $136,910, with a median of $112,300.
Mechanical Engineers in New Jersey: actual employer-disclosed pay
Public records from 209 certified H-1B Labor Condition Applications filed with the U.S. Department of Labor. Median offered wage: $100,901. Every figure below is an actual offered salary an employer attested to under federal law.
By DOL wage level
DOL classifies every offer into one of four wage levels based on the role's experience and skill requirements.
| Level | Filings | Median offer |
|---|---|---|
| Level I — entry | 51 | $81,432 |
| Level II — qualified | 87 | $98,000 |
| Level III — experienced | 39 | $120,349 |
| Level IV — fully competent | 28 | $150,929 |
Top employers filing for this role
Companies with the most certified filings for Mechanical Engineers in New Jersey. Median offer is across all of that employer's filings.
| Employer | Most-filed title | Filings | Median |
|---|---|---|---|
| HCL AMERICA INC | Senior Design Lead | 11 | $100,901 |
| AMD Design LLC | MTS Hardware Development Eng. | 8 | $120,349 |
| Holtec International | Mechanical Engineer | 8 | $115,910 |
| G&J Steel & Tubing Inc. | Mechanical Engineer (Automation) | 6 | $100,901 |
| Intellectt Inc | Quality Engineer | 5 | $94,286 |
| Impact Displays Group, LLC | Mechanical Engineer | 4 | $97,594 |
| AME, Inc. | Building Automation Engineer Project Manager | 3 | $120,000 |
| AUTOMANN, INC. | MECHANICAL ENGINEER | 3 | $98,325 |
| Becton, Dickinson and Company | Associate Staff Engineer | 3 | $152,440 |
| MAX I.E.G. LLC | Mechanical Engineer | 3 | $119,000 |
Recent sample filings
A snapshot of recent certified offers. Each line is a real, public, verifiable record.
- MTS Hardware Development Eng. at AMD Design LLC$120,349SecaucusWage Level IIIDecided Mar 31, 2026I-200-26083-725412
- CAD Engineer at Crestron Electronics, Inc.$133,127RockleighWage Level IIIDecided Mar 30, 2026I-200-26082-721453
- Aviation Research Scientist/Engineer at Diakon Solutions, LLC$104,000Egg Harbor TownshipWage Level IIDecided Mar 30, 2026I-200-26082-722953
- Equipment Automation Engineer at Intellectt Inc$131,040RahwayWage Level IIIDecided Mar 27, 2026I-200-26079-720042
- Sr. Mechanical Engineer at AMD Design LLC$100,901SecaucusWage Level IIDecided Mar 27, 2026I-200-26079-717942
- Project Engineering Manager at Sheela Inc$120,349PiscatawayWage Level IIIDecided Mar 26, 2026I-200-26078-716128
- Mechanical Design Engineer at Impact Displays Group, LLC$100,901CarlstadtWage Level IIDecided Mar 23, 2026I-200-26075-705014
- Sr. Mechanical Engineer at Shenoy Engineering, PC$120,432Pine BrookWage Level IIIDecided Mar 19, 2026I-200-26071-697942
Source: U.S. Department of Labor, Office of Foreign Labor Certification. Disclosed wages reflect what employers attested to pay; actual paid wages may differ. Only certified filings are shown — denied and withdrawn cases are excluded.
Where do you stand?
Get an instant percentile reading. Anonymous, no signup.
Aggregate unlocks once 5 readers have shared a salary for this role and state.
Mechanical Engineers pay by experience level in New Jersey
Each band reflects DOL Wage Levels I-IV mapped onto a four-step ladder. Click a level to see the disclosed-wage range for that segment.
Mechanical Engineers specialties in New Jersey
Real specialty titles employers file for, clustered from 114 certified offers. The most common variant is Mechanical Engineer at a median of $100,901.
| Specialty | Top employer | Filings | Median offer |
|---|---|---|---|
| Mechanical Engineer | G&J Steel & Tubing Inc. | 65 | $100,901 |
| Associate Staff Engineer | Becton, Dickinson and Company | 6 | $95,104 |
| MTS Hardware Development Eng. | AMD Design LLC | 6 | $120,349 |
| Senior Design Lead | HCL AMERICA INC | 6 | $96,614 |
| Mechanical Design Engineer | ACME Plastics of New Jersey, Inc. | 5 | $95,000 |
| Validation Engineer | LS Solutions, Inc. | 4 | $86,869 |
| Design Engineer | Priamba Soft LLC | 4 | $94,328 |
| Mechanical Engineers | HCL AMERICA INC | 4 | $114,525 |
| Project Engineer | CHA Consulting, Inc. | 4 | $101,090 |
| Service Engineer | Tetra Pak Inc. | 4 | $84,733 |
| Process Engineer | R&D Circuits, Inc. | 3 | $93,270 |
| Technical Program Manager | Amazon.com Services LLC | 3 | $135,900 |
Specialties with 10 or more filings link to a dedicated breakdown.
Mechanical Engineers in New Jersey, by industry
Median offered wage across 203 certified filings, grouped by NAICS industry sector. Manufacturing leads with a median of $101,411.
| Industry | Largest employer | Filings | Median offer |
|---|---|---|---|
| Manufacturing | AMD Design LLC | 82 | $101,411 |
| Professional services | Holtec International | 53 | $110,240 |
| Technology and software | HCL AMERICA INC | 42 | $94,328 |
| Retail and wholesale | AUTOMANN, INC. | 20 | $96,663 |
| Education | The Trustees of Princeton University | 4 | $80,372 |
| Energy and utilities | Constellation Energy Solutions LLC | 2 | $127,642 |
Sectors with at least 25 filings link to a dedicated page with full distribution and sample employer breakdown.
Wage trend
Median annual wage in New Jersey over the past 3 BLS OES releases. Real values are CPI-adjusted to 2025 dollars.
Typical entry
Education
Bachelor's degree
Experience
None
On-the-job training
None
Top skills (O*NET)
- 4.9 / 5
Engineering and Technology
Knowledge
- 4.7 / 5
Mathematics
Knowledge
- 4.6 / 5
Design
Knowledge
- 4.4 / 5
Mechanical
Knowledge
- 4.3 / 5
Physics
Knowledge
- 4.2 / 5
English Language
Knowledge
- 4.0 / 5
Oral Comprehension
Ability
- 4.0 / 5
Written Comprehension
Ability
Common tasks (O*NET)
- 01
Read and interpret blueprints, technical drawings, schematics, or computer-generated reports.
- 02
Research, design, evaluate, install, operate, or maintain mechanical products, equipment, systems or processes to meet requirements.
- 03
Confer with engineers or other personnel to implement operating procedures, resolve system malfunctions, or provide technical information.
- 04
Develop, coordinate, or monitor all aspects of production, including selection of manufacturing methods, fabrication, or operation of product designs.
- 05
Investigate equipment failures or difficulties to diagnose faulty operation and recommend remedial actions.
- 06
Develop or test models of alternate designs or processing methods to assess feasibility, sustainability, operating condition effects, potential new applications, or necessity of modification.
- 07
Recommend the use of utility or energy services that minimize carbon footprints.
- 08
Specify system components or direct modification of products to ensure conformance with engineering design, performance specifications, or environmental regulations.
10-year outlook
Growth 2024 → 2034
+9.0%
Projected annual openings
—
BLS outlook
Growing faster than average
Source: BLS Employment Projections, 2024–2034 cycle.
Sponsored
Build the skills employers list for Mechanical Engineers
Online courses from licensed providers. We may earn a commission when you enroll. The commission does not influence our rankings or wage data.
Explore coursesCompare Mechanical Engineers pay across nearby states
Considering a move? Compare New Jersey with another state
Frequently asked questions
- What is the median salary for Mechanical Engineers in New Jersey?
- According to BLS Occupational Employment Statistics, the median annual wage for Mechanical Engineers in New Jersey is $112,300.
- How does New Jersey compare to the national median for Mechanical Engineers?
- The New Jersey median is +4.3% versus the BLS national figure of $107,639.
- What is the salary range for Mechanical Engineers in New Jersey?
- BLS reports the 10th-percentile annual wage at $79,160 and the 90th-percentile at $162,800, which captures most full-time workers in the role.
- Is Mechanical Engineers a growing field?
- BLS Employment Projections show employment growing by 9.0% over the projection cycle. See the 10-year outlook section above for details.
- What education is required for Mechanical Engineers?
- BLS lists the typical entry-level education as Bachelor's degree. Many employers also weigh prior experience and credentials.
Information on this page is for general educational purposes only. It is not career, financial, or tax advice. Wage data reflects BLS estimates for the reference year shown and may not match individual offers, employer-specific ranges, or current market conditions. Confirm with a licensed professional before making career or compensation decisions.